This product is designed for rail-mounted installation; it features 4 0‑10V dimming interfaces that, together with 0‑10V dimming drivers, allow for the dimming of fluorescent lamps, LED lights and other types of lighting fixtures. The module includes 4 smart relays that enable control over the power supply to the 0‑10V dimming drivers.
· Supply voltage: DC 24V
· Controlled circuits: 4 relay switches, 4 0-10V dimming interfaces
· Load for relay circuit switches (resistive): AC 250V with a surge resistance of over 170A
· Maximum switching current of the relay: 16A
· Mechanical durability of the relay: 10,000,000 operations
· Electrical durability of the relay: 100,000 operations
· Dimming parameters: 4×40mA current
· Static power consumption: 1W
· Maximum power consumption: 2.5W
· Control ports: 2×Etron-Net
· Maximum number of network-connected devices: 63
· Dimensions: 72mm×98mm×68mm
· Weight: 264g
· Standard rail-mounted installation
· Uses Etron-Net bus for communication
· 4 channels of 0-10V dimming signals and 4 channels of 16A relay switches
· It is possible to set the initial values for each circuit (module switch settings, dimming intensity)
· Manual control buttons are available, allowing manual operation of the circuits in case of network failures
· The actual status of each circuit is immediately reported to the monitoring center after a scene command is executed
· The dimming interface features ESD protection of ±2kV, as well as short-circuit and over-current protection
· Dimming is possible across a range of 0%-100% (100 levels), providing true linear dimming
· Program updating while the device is in use is supported
This product is designed for rail-mounted installation; it features 4 0‑10V dimming interfaces that, together with 0‑10V dimming drivers, allow for the dimming of fluorescent lamps, LED lights and other types of lighting fixtures. The module includes 4 smart relays that enable control over the power supply to the 0‑10V dimming drivers.
